36
EN
1)
2)
3)
4)
5)
6)
7)
8)
Installation of the DuoFern Environmental Sensor
Legend
1)
Cable connection to the rain sensor in the housing cover
2)
Drive connections (spring-loaded terminal, / N / Up / Down), suitable for
solid conductor up to 1.5 mm² or fine-wire conductor
3)
Opening for a motor cable
4)
Power supply connections (230 V/50 Hz, spring-loaded terminal, L1 / N / ),
suitable for solid conductor up to 1.5 mm² or fine-wire conductor
5)
Opening for the power supply connecting cable
6)
Antenna
7)
Fine fuse 6.3 A
8)
Reset button
ATTENTION!
When connecting the cable, the printed circuit board must not be removed from the
bracket.
i
