51
EN
(10)
(16)
(15)
(10)
(16)
(10)
(15)
5
6
7.3 Dismantling the catch (10)
The catch (10) can be mounted with or without
the freewheel mechanism.
◆
The factory pre-setting for the catch is
“
with the freewheel mechanism
”.
◆
The catch
(10)
must first be dismantled before
changing the mounting mode.
1.
Press the side parts of the retaining clip
(15)
together
and pull the catch
(10)
off the drive adapter
(16)
.
7.4 Mounting the catch (10) with the freewheel mechanism
1.
Slide the catch
(10)
onto the drive adapter
(16)
so that it can free-wheel and so that it engages
behind the retaining clip
(15)
.
Free-wheeling is given if the catch
(10)
can be
easily turned back and forth.
i
If the tubular motor is to be operated with the self-learning end point setting and obstacle detection, then
the catch
(10)
must be mounted with the freewheel mechanism
(original factory settings)
.
ATTENTION!
Installing the drive adapter (10) without the
freewheel mechanism can cause damage to the
awning or lead to malfunctions with the self-
learning and manual end point setting.
◆
Never
install the catch
(10) without the free-
wheel mechanism.
