rackit Paradigm, Инструкция по установке и эксплуатации

Страница: 42 / 48

Paradigm Installer/User Guide
Symptom Action
Mouse is inoperable on one If the mouse is inoperable on a channel, try the mouse
computer channel reset command <MR> or <MW> with that PC selected.
(For instructions on command mode, see ‘Basic
Operations’.)
Verify that the cables from the computer to the
Paradigm are connected properly.
Make sure that you have keyboard/mouse privileges
for that channel.
Verify that the mouse driver and application are
configured properly for mouse support.
Verify that the computer works properly with a mouse
connected directly to it. If the problem persists, contact
Rackit Technical Support.
Mouse is inoperable on all Verify that the mouse is plugged into the correct PS/2
computer channel port on the back of the Paradigm.
Verify that the mouse is PS/2 style and a supported
brand. (See the ‘Product Overview’ chapter for more
information.)
Try the mouse reset command <MR> or try the ‘Reset
standard mouse/keyboard’ command from the OSD
Command Menu for computers using PS/2 mice. Use
<MW> or ‘Reset wheel mouse’ for computers using the
Microsoft IntelliMouse. (For instructions on command
mode, see the ‘Basic Operations’ chapter.)
Verify that the mouse works when connected directly to
a computer.
Cycle power to the Paradigm unit. (You do not have
to power down your computers for this.) If the mouse
remains inoperable, power down all attached
computers, cycle power on the Paradigm, then
repower the computers. If the problem persists,
contact Rackit Technical Support.
36