The LapCeiver A.L.T. uses an AA battery. A good battery
with a full charge should last approximately 18 hours of
continual use. To extend the life of your battery and prevent
battery corrosion, remove the battery when not in use.
The Battery cover is located on the back of the LapCeiver
A.L.T.
To install the AA battery,
1.
Slide the locking tab up to release the battery cover
2.
Slide the battery cover to the right and remove it from
the back of the LapCeiver A.L.T.
3.
Install the battery, matching the polarity and shown in
the battery compartment.
4.
Reinstall the battery cover by sliding the cover along the
rail to the left.
5.
Lock the cover in place by pushing the locking tab down.
Information stored in memory locations is not lost when the
battery is removed or dead.
