background image

- 1 -

PCZ-528.3

Programmable 

control timer

The PCZ-528.3 control timer is a universal programmable timer 

that combines the features of an astronomical, weekly and an-

nual timer.

»

256 programs for switching the relay on/off; 

»

Each of the programs can be executed in one of the seven date 

intervals defined in the annual cycle;

»

Ability to enter up to 32 holidays and select which programs 

will run on holidays;

»

For each of the work programs, it can be independently deter-

mined whether the program will be executed in an hourly cyc-

le (fixed hour and minute) or in an astronomical cycle (related 

to the position of the sun in relation to the horizon);

»

In each of the astronomical programs, it is possible to set an in-

dependent shift of switching on/off in relation to the selected 

astronomical point (e.g. turn on one hour before sunset, turn 

off two hours after dusk);

Purpose

Features of the timer

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Содержание PCZ-528.3













Отзывы: