Infra Red Mode –
There must be an Infra Red Transmitter operating and
an Infra-Red Detector mounted on your car and plugged
into the LapCeiver A.L.T to work in this mode.
The Infra-Red Mode allows a driver or crew to get the Lap
times without the track having a Timing & Scoring System.
This will enable the driver or crew to determine if changes to
the car setup or driving line have the desired effect.
Plug the IR Detector into the USB jack located on the right side of
the LapCeiver A.L.T., the antenna icon on the LCD will disappear.
Mount the IR Detector on the car. Make sure the detector faces in
the direction of the IR Transmitter.
1.
Sensitivity –
Track or weather conditions can affect how well
the IR Detector picks up the IR beam. You may need to adjust
the sensitivity level to compensate for these conditions.
1 = accurate but low sensitivity.
2 = default.
3 = not accurate but high sensitivity.
