![background image](http://html2.mh-extra.com/html/racal-instruments/1257/1257_manual_3121580056.webp)
1257 User Manual
EADS North America Defense
Using the Front Panel Controls 3-23
Test and Services, Inc.
©
2001
---STORE/RECALL---
Type: NVRAM
Option: Image
< Do?: Update?
4. Press the fourth key (bottom) to store the power-up state.
Pressing any other key cancels the change.
Erasing Non-Volatile RAM
The entire non-volatile RAM may be erased if desired. This
erases all presets, including switching states, the power-up
switching state, and the menu preferences. The menu
preferences will be set to the factory defaults.
To erase the entire non-volatile RAM, proceed as follows:
1. Press the top key next to the display. Rotate the knob until
the top line reads:
>---STORE/RECALL---<
2. Select line 2 (next to the top line) by pressing the second
key. Rotate the knob until line 2 of the display reads as
follows:
---STORE/RECALL---
> Type: NVRAM <
Config: Image
Action: <select>
3. Press the fourth key to select line 4 of the display. If line 4
does not read
Erase All
, then rotate the knob until it does:
---STORE/RECALL---
Type: NVRAM
Config: Image
< Do?: Erase All
4.
Press the fourth key (bottom) to erase the non-volatile RAM.
Pressing any other key cancels the operation and leaves the
memory intact.
System Menu
Description
The SYSTEM menu allows viewing of system information. This
consists of the firmware revision numbers of the boot ROM and
flash program. This information may be valuable when contacting
customer service to resolve a problem.
Viewing Firmware Revision Numbers
To view the revision letters of the firmware, follow these steps: