Publication No. 980855 Rev. A 1256 User Manual
EADS North America Test and Services GPIB and RS-232 Interfaces 4-15
is an odd number). For most applications, this is set to “none”.
To set these parameters, proceed as follows:
1. Press the top key. Rotate the knob until the top line reads:
>-----SETTINGS-----<
2. Select line 2 (next to top line) by pressing the second key.
This selects line 2 so that you may select the type of setting
to work with:
-----SETTINGS-----
> Type: Display <
Option: Format
Status: Decimal
3. Rotate the knob until line 2 reads as shown below (lines 3
and 4 may differ):
-----SETTINGS-----
> Type: RS-232 <
Option: Data Bits
Status: 8
4. Press the third key to select line 3 of the display. Rotate the
knob until line 3 indicates the desired parameter as shown
below (in this example, the parity option is chosen):
-----SETTINGS-----
Type: RS-232
> Option: Parity <
Status: Even
5. If line 4 of the display already indicates the desired choice for
the parameter, then no action is necessary. Otherwise, press
the fourth key. Rotate the knob until line 4 displays the
desired choice (in this example, “None” is the desired choice):
-----SETTINGS-----
Type: RS-232
Option: Parity
<Update?: None
Then press the fourth key to confirm the update. Pressing
any other button cancels the change.
Set the data terminal or computer to match the settings you select
for the 1256.
NOTE:
Menu preferences are not normally retained after the power is
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com