Powering the Dash Cam On / Off
Auto Power On / Off
Once the vehicle engine is started, the Dash Cam automatically turns on and starts recording
( must have the Micro SD Card installed). After the car engine is stopped, the Dash Cam will
automatically save the last recorded file and shutdown.
Manual Power On / Off and Reset
Manual Power On / Off
Short press the Power button 1 second to power the Dash Cam on and off.
Reset the Dash Cam
In case the Dash Cam fails to function normally due to unknown causes, press the Reset
05
RAC 225 S Super HD Dash Cam
NOTE:
If your vehicle in car power remains on after the car engine has been turned off, you
may need to remove the power lead, or turn the RAC 225 S off using the power button. This is
because if the in car power remains on, the RAC 225 S will not know that the engine has
turned off.
Please MUST insert the GPS cable into the Dash Cam first and then insert the car
charger into the GPS mount. Otherwise it will not open the dash cam every time.
button with sharp pin, then wait for restarting the dash cam. Sometimes it is also necessary
to format the Micro SD Card, which can be performed from the menu settings.
Power Button
Reset Button
