G-sensor Collision Recording Protection
(Protect Level)
When a collision is detected while recording, the lock icon will appear on the upper
right side of the screen and the current video segment will be protected automatically
and cannot be replaced until it is deleted from the SD card.
Audio On / Off
Press OK button to stop recording, and then press DOWN button to turn the
microphone on and off. On means the video recorded with voice, off means no
voice recorded even the car has voice.
09
RAC 225 S Super HD Dash Cam
NOTES:
1. The default setting is Low.
2. If the collision happened and you wish to protect the following videos
when the collision is detected before the last 5 seconds of current video,
you can also press Lock button to activate the SOS function during
recording.
3. If there is an incident, and you do not want to risk the segment being
overwritten, you should always push the Lock button to protect the current
segment.
Menu Operation
Press OK button to stop recording, then press Menu button to enter menu setting,
press UP / DOWN button to select the menu, and then press OK button to enter the
setting, press UP / DOWN button to select the option, and then press OK button to
confirm the setting. After finished the setting, press Menu button to exit menu setting.
