Installing the Dash Cam
1. Insert the GPS mount into the 3M windscreen mount, the GPS cable goes through the
hole of the 3M windscreen mount.
2. Screw the GPS mount into the top of the Dash Cam, and tighten the screw to make sure the
GPS mount is securely locked in place.
4
.
Tear off the sticker from the 3M windscreen mount, and position the 3M windscreen
mount onto the windscreen.
Note: The 3M mount is hard to move, so please make sure that the windscreen mount
is in the correct location and position prior to fixing onto the windscreen.
Connecting to Power
Use only the supplied car charger for powering the Dash Cam.
1.
Connect one end of the car charger to the USB port on the GPS mount.
2. Plug the other end of the car charger to the in car power socket of your vehicle. Once
the vehicle engine is started, the Dash Cam automatically turns on. It will also turn off
when the engine is turned off. (
Note:
Some vehicles have an in car power supply that
remains on, even if the engine is turned off. If this is the case, you will need to manually
turn the Dash Cam on and off, using the power button, when you enter and leave the
vehicle)
.
www.proofcam.com
04
Note:
Any excess cable can normally be tucked into the ceiling of the vehicle. We have a
video to advise on how best to fit the RAC 225 S which is available at
www.proofcam.com
and visit “
Dash Cam Resources
”. You can also search “
How
to fit a 225 S
” on YouTube - please visit the ProofCam channel on You Tube for a
number of helpful videos.
3. Insert the GPS cable from the 3M windscreen mount into the RAC 225 S.
5. Rotate the Dash Cam 360° to secure the desired view
