www.proofcam.com
08
Recovery the video to the protection video:
During Playback menu, press UP and DOWN buttons to select VIDEO or EVENT file, when
you choose one, the color will be changed to Yellow; press OK button to enter the file and
press UP and DOWN buttons to select the video; press MENU button and press UP and
DOWN buttons to select the Protect menu setting; Press OK button and press UP and
DOWN buttons to select “Protect One” or “Protect All”, then press OK button to select a file
or all files, and press OK button twice to recovery the current video or all the videos to
protected videos.
NOTE:
1. All the manual protected videos in VIDEO files can’t be replaced, but their file
name can’t be changed to “
EMERXXXXXX-XXXXXXF.MOV
” and moved to EVENT
file.
2. The recording will stop automatically and the screen will show “ No space,
format SD card” if the Micro SD card is full of protected files. To continue
recording, please do this in thress ways:
a. Change another Micro SD card;
b. Format Micro SD card in dash cam or computer;
c. Delete the protected files in computer.
Motion Detection:
First, press OK button to stop recording; Second, press Menu button to enter Menu
settings to activate the Motion Detection function ( the default setting is Off, press UP
and DOWN buttons to select the Low/Middle/High, press OK button to confirm the
selection); Third, press Menu button to exit Menu settings and the motion detection
icon will appear on the right side and under the exposure bias value of the screen
and standby for detection, it will be recording automatically once the Dash Cam detects
any motion in front of the lens, the recording time is generally 10-15 seconds without
any motion is detected again.
The Dash Cam will start to record next 10-15 seconds if any motion is detected, press
OK button to stop recording and press MENU button to enter menu settings to set the
Motion Detection to Off, and then can exit from the motion detection mode and icon will
disappear from the screen.
NOTE:
1. When the battery is fully charged and is in good condition, the recording
time depends on the loop recording segment and the default setting is 3
minutes.
2. As the dash cam is used, the battery storage capacity will decrease gradually.
