- 23 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
4.5
Position of the stabilisers
1
2
3
Legend
1 Operating
clearance
2 Pins
3 Tie
rod
1
2
=
=
Legend
1 Stabiliser
2 Centreline
Ensure that the stabilisers (1) are equi-distant from the tractor
centreline (2).
IMPORTANT:
Grease and remove rust etc. from stabiliser bolts
and threads (rods or shims) before hitching the
implement to the tractor. The horizontal axles (3) of
WKHOLQNVPXVWEH¿[HGWRDYRLGDQ\XQGHVLUHGRU
unanticipated potentially dangerous play.
4.6 Top
link.
1
2
a
b
Legend
1 Length
A
2 Length
B
Before hitching the implement, make sure that the thread lengths
(1 and 2) on each side of the top link are identical.
IMPORTANT:
Excess grease inside the top link can block the link
bar. Remove the lubricating nipple and remove the
excess grease.
CAUTION:
Use a ball joint to connect the top link at the
implement end.
CAUTION:
Do not use automatic hooks.
ʈ
The size and shape of the hook jaw varies according to the
manufacturers and models, which may, in some cases, result
in a risk of interaction with draw bar yokes.
ʈ
The automatic spring latch may cause blocking in rotation of
the ball joint that can cause it to become worn or to fail. This
phenomenon is accentuated on Cat. III hitches: the larger the
diameter of the pin, the smaller the amount of material for the
lower ball joint, which makes it less resistant.
1
2
Legend
1 Ball
joint
2 Automatic
hook
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
