RAB Lighting Gotcha! Plus GT500, Руководство по установке

Страница: 5 / 13

FIG 1 SURFACE JUNCTION BOX INSTALLATION
1. Discard the
Surface Adaptor Plate
when mounting to a
Recessed Junction
Box.
2.
Attach Cross Bar to junction box using the screws supplied.
3. Make connections to the supply wires in the junction box according to the “Basic
Kit Wiring” on pg 5.
4.
Push connected wires into junction box.
5. Place the
O-Ring
over the
1/4-20 Screw
and insert into the center of the cover
plate and tighten. Use
Cap
to cover opening.
Wall
Cross Bar
& screw
Recessed
Junction Box
1/4-20 Screw with
O-Ring and Cap
FIG 2 RECESSED JUNCTION BOX INSTALLATION
GT500R Recessed Junction Box Installation:
4
GT500 Sensor with separately purchased floodlights:
1.
Mount sensor to 1/2” NPS hole of a RAB CU4 EZ weatherproof coverplate (not
provided).
2. Mount fixtures (not provided) to coverplate or locate remotely.
3. Wire as shown in “Basic Wiring Diagram” on pg 5.
FIG 3 RAB CU4 EZ WEATHERPROOF COVERPLATE