FALCOR
INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
TM
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough to
touch. Do not clean or maintain while fixture is energized.
1. Clean glass lens & fixture with non-abrasive glass
cleaning solution.
2. Do not open fixture to clean the LED. Do not touch the
LED.
WIRING
Universal voltage driver permits operation at 120V thru
277V, 50 or 60 Hz. Units ordered with (/480V) suffix are
480V.
1. Connect the black fixture lead to the LINE
supply lead.
2. Connect the white fixture lead to the COMMON
supply lead.
3. Connect the GROUND wire from fixture to
supply ground.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation
operation or maintenance.
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct. Refer to
wiring directions.
2. Is the fixture grounded properly?
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2015 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
ACCESSORIES
Wire Guard:
GDFALCORW
Poly Shield:
GDFALCORP
GUARD OR SHIELD INSTALLATION
Wire Guard and Poly Shield mount with (4)
Stainless Steel Screws.
Screws are provided with the
accessory. See Fig. 6 for Guard. See Fig. 7 for Shield.
1. Line up guard or shield with existing pre-drilled holes in
frame as shown, tighten screws.
Fig. 6
Fig. 7
Screws (4)
Wire Guard
Housing
Screws (4)
Poly shield
Housing
FALCOR-FALCORA-IN-0915
Fig. 5
0-10V DIMMABLE WIRING
Universal voltage driver permits operation at 120V thru 277V,
50 or 60 Hz. For 0-10V Dimming, follow the wiring directions
as in Fig. 5.
1. Connect the black fixture lead to the LINE supply lead.
2. Connect the white fixture lead to the COMMON supply
lead.
3. Connect the GROUND wire from fixture to supply ground.
Do NOT connect the GROUND of the dimming fixture to
the output.
4. Connect the purple fixture lead to the (V+) DIM lead.
5. Connect the gray fixture lead to the (V-) DIM lead.
6. Cap the yellow fixture lead, if present. Do NOT connect.
Fig. 4
WIRING
Universal voltage driver permits operation at 120V thru
277V, 50 or 60 Hz. Units ordered with (/480V) suffix are
480V.
1. Connect the black fixture lead to the LINE
supply lead.
2. Connect the white fixture lead to the COMMON
supply lead.
3. Connect the GROUND wire from fixture to
supply ground.
Содержание FALCOR 80W
