360° 12V LI-ION COB LED INSPECTION LAMP
- BODY ONLY
MODEL NO:
LED36012V
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9
Inspect the lamp for wear and damage to ensure items are safe before inserting a battery. If worn or damaged
DO NOT
use.
8
DO NOT
shine directly into your, another person’s or an animal’s eyes.
8
DO NOT
allow children to use the lamp.
8
DO NOT
use the lamp if you suspect that the battery or the lamp casing is damaged.
8
DO NOT
crush, puncture, short contacts or dispose of in fire or water.
8
DO NOT
expose to temperatures above 60°C (140°).
2. INTRODUCTION
Unique and innovative 360° swivel and tilt function enables the light source to be positioned in any direction. Exclusive patented
design owned and registered to Sealey. Each lamp houses a super bright COB LED providing up to 1000 lumens output with 120°
spread of light, illuminating the whole work area. CRI 80 + with brightness of 6500K. Features swivel hook and a super strong
magnet on the base, which allow hands-free operation. Requires Model No. CP1200BP 12V 1.5Ah Li-ion Power Tool Battery and
Model No. CP1200MC 12V Li-ion Battery Charger.
3. SPECIFICATION
Model No.:..........................................................LED36012V
IP Rating: ............................................................... IP20/IK07
LED Qty: ............................................................... 1 COB 8W
Lumen Output: ........................................................... 1000lm
Maximum Length: Without Battery 223mm With Battery:243mm
Minimum Length: Without Battery 202mm With Battery:223mm
Operating Time (High/Mid/Low)....................... 2hrs/4hrs/8hrs
Battery Options:
12V 1.5Ah Li-ion, 12V 3Ah Li-ion, 12V 4Ah Li-ion (not included)
Charging Time:
12V 1.5Ah Li-ion 1hr, 12V 3Ah Li-ion 2hrs, 12V 4Ah Li-ion 3hrs (not included)
4. OPERATION
4.1.
Insert the battery into the socket on the rear of the lamp (fig.1). Press the On/Off
button and the charge indicator LEDs will show battery state (3 LEDs indicate full charge).
4.2.
Direct the lens away from your eyes before switching on.
4.3.
Toggle the lamp between High / Medium / Low output using the ON/OFF switch.
4.4.
The lamp may be suspended by the hook in the base or attached to any ferrous surface by using the magnets.
4.5.
When the light is hanging from the hook it can be rotated through 360° for more precise positioning.
4.6.
Separate the top and bottom sections by pulling apart. When attached to a ferrous surface, using the base magnet, the lamp can
rotate to shine in any direction.
LED36012V Issue 1 02/06/20
Original Language Version
© Jack Sealey Limited
Refer to
instructions
fig.1
