DAGRlighting.com
Page 1
FL570.1406.IM
1.866.203.0040
May 2014
Thank you for purchasing a DAGR Industrial Lighting fixture – one of the most
durable LED fixtures on the market. Our lights have been engineered, tested and
certified to ensure optimum performance in the industry’s toughest environments.
When installed, operated and maintained in accordance with product specifications
and instructions, your new LED fixture can be expected to provide many years of
reliable lighting performance and energy savings.
If you have any questions about the use and maintenance of your DAGR LED fixture,
please contact us toll-free at 1.866.203.0040 or email
.
Important Safety Instructions
RISK OF FIRE AND/OR ELECTRIC SHOCK
This product should be installed and maintained by a
qualified Electrician
ONLY
, in accordance with all
applicable electrical codes.
Make sure the power is
OFF
before installing or
servicing. Never attempt to install or remove a fixture
from an energized circuit. Disconnect power at fuse or
circuit breaker before installing or servicing.
Proper grounding is required to ensure personal safety.
Inspect all units for damage prior to installation.
Do not alter, relocate or remove wiring, lamp holders,
ballast, drivers or any other electrical component.
Do not allow flammable or combustible materials to
accumulate on fixture.
Always wear appropriate personal protective equipment
(PPE) during installation, maintenance or handling.
Important Safety Instructions
HAZARDOUS LOCATIONS
Remove fixture from hazardous locations before
attempting any maintenance.
Do not return fixture to service in hazardous locations if
seals have been broken or product is damaged.
This fixture is made of aluminum and is not suitable for
use in underground mines where explosive atmospheres
may exist.
To maintain explosion proof integrity, make sure all
threads are fully engaged.
Product Unpacking
This fixture has been packed to avoid damage during transit. Inspect the fixture to confirm there is no damage prior
to installation. Do not install a damaged fixture or change fixture components.
WARNING
WARNING
