TEX1000-LCD
36 / 38
User Manual
Rev. 1.1 - 23/06/05
•
PHONE NUMBER
: GSM telephone number recognized from the station to which
sending the telesignalling;
•
SMS
: selecting “YES”, the sent of SMS command to the system is enabled;
•
ACS
: selecting “YES”, the SMS reception is enabled.
Note:
For a corrected sent, the set up number must be prefixed from international
code +XX (+39 for Italy).
Once completed the data set up, press this key to stored the information on the
TEX1000-LCD
.
Finished this operation, exit from the program window of the remote station by click
on “Exit”.
Return on the standard interface of the “TELECON” software, by a click on the chosen
key of the “General” measures, is now possibile set up the threshold and the
intervention times of the various alarms, following the logic illustrated on the “Alarms
Management” chapter.
Note:
in the choice of the alarms intervention thresholds is advisable to consider
always a margin of some percentages points regarding the operation values at
capacity.
10.4 Remote Control
Through the PC, opportunely connected to a modem, it is possible to carry out the
reading of all the parameters of the
TEX1000-LCD
.
The “TELECON” software supplies the connection with the station through the
telephone line and realizing the typical operations like: reset of all the alarms, switching
on and switching off the transmitter, lowering of the feeding, supply to the tests on the
dummy load, etc., therefore through the analysis, to find the eventual faults and to
indicate spare parts necessary to repair it.
