![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/tex1000-lcd/tex1000-lcd_user-manual_3100426037.webp)
TEX1000-LCD
33 / 38
User Manual
Rev. 1.1 - 23/06/05
The first time that "TELECON" software come used, after that you have chosen the
station, it is necessary to insert:
• the COM port used,
• the Baud rate (set up 9600),
• the kind of connection (set up direct via cable).
Once that the correct data are inserted, click on the "Start" button in order to confirm,
it is entered in the main window of the "TELECON", like represented in figure:
Use this window in order to modify the Start time. In order to modify the parameter
click with the left key of the mouse on "TStart" (standard set up to 300sec., equal to 5
min.), it will be opened a new window where it will be possible modify the value.
Press enter in order to confirm.
Make double click on the green written, placed up on the left, that appears in the
TELECON and select the “Eeprom" voice (like shown in the figure below).