![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/telink-snmp1/telink-snmp1_user-manual_3107668008.webp)
4 / 24
User Manual
Rev. 1.0 - 13/03/09
TELINK-SNMP1
All signals and the power supply are provided with connectors for a quick
replacement.
The power supply is galvanically isolated and the signals are fi ltered to have an
high immunity to RF disturbances.
In rear panel there are ten led to a complete synoptic on the serial line traffi c and
diagnosis on error type.
TELINK-SNMP1 is equipped with watchdog hardware to reset the equipment
automatically in case of abnormal stop of processor or in case of lowering below
the threshold about power supply voltage.
TELINK-SNMP1 has a “simulation” modality that allows to connect an ANTLAN
system regularly to TELINK-SNMP1 and reading the virtual value (test of the
protocol and network).
The rear panel features the mains input connector, as well as the telemetry input
connector, the dip-switch for the confi guration of the Main card and the programming
connector both for the Main card and for the SNMP ANTLAN card.