![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/telink-snmp1/telink-snmp1_user-manual_3107668019.webp)
15 / 24
User Manual
Rev. 1.0 - 13/03/09
TELINK-SNMP1
6.2
Rear
Panel
Figure 6.2
[1] GROUND
Ground
connection.
[2] FUSE BLOCK
Fuse carrier.Use a screwdriver to access the fuse. Contains two
general protection fuses rated 2 A.
[3] PLUG
VDE plug for mains power supply.
[4] 24 VDC IN-
Not used.
[5] 24 VDC IN+
Not used.
[6] RS232
DB9 connector for direct serial communications in RS232 standard
with the equipments under telemetry.
[7] PROG.
RJ45 connector for programmation of TELINK in RS485 standard
(confi guration) and fi rmware upgrade.
[8] DIPSWITCH 1
Dip switch to regulate the TELINK card (for confi guration read the
TELINK user manual).
[9] DIPSWITCH 2
Dip switch to regulate the TELINK card (for confi guration read the
TELINK user manual).
[10] LAN
Not used.
[11]
Not used.
[12] DC PLUG
Not used.
[13] SERVICE
DB9 connector for interconnection in RS232 standard with PC for
programmation and e drivers upload for TANT137 card.
[14] SYNOPTIC 1
LEDs for information about the status of communications in RS232
and RS485 standards (chap. 8.4.2).
[15] SYNOPTIC 2
LEDs for information about the status of the card (chap. 8.4.2).
[16] ETHERNET
RJ45 connctor for communication with LAN network.
[17] SYNOPTIC 3
LEDs for information about the status of ETHERNET connector
(chap. 8.4.2).