![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/telink-snmp1/telink-snmp1_user-manual_3107668011.webp)
7 / 24
User Manual
Rev. 1.0 - 13/03/09
TELINK-SNMP1
Menu 1
Nota : If address http://192.168.0.167 does not work, check and set IP address
as 192.168.0.XXX (where XXX is a fi gure between 0 and 255, excluding 167 that
is TELINK-SNMP1 interface default address). To change the IP address, follow
the instructions in the manual or in the online guide and technical help, specifi c
for the Operating System you use.
2) Modify the parameters in accordance with the own needs.
3) Now interface is ready to remotely read data and modify the various settings
of the equipment.
5.2.2 SNMP
telemetry
SNMP (Simple Network Management Protocol) is a worlwide protocol that allows
the management and supervision of the equipment connected to the network.
Measurements and commands are described by a MIB (Management Information
Base), which is a list of OID (Object Identifi er). Each OID is a variable that can
be written (SET) or read (GET) through a NMS (Network Management System)
compatible with SNMP.
The MIB is a text fi le written in ASN.1 and it is imported from the NMS in order to
know what OID can be expected by the AGENT (proxy card, alias SNMP ANTLAN
in this case) and how to interpret the information received.
On request, the MIB may be associated with the transmission of e-mail.
Note : The user can not freely distribute the MIB, unless written authorization
issued by the manufacturer. The MIB is property of the manufacturer.
The SNMP version used in this application is the v2, and is compatible with all
NMS systems.
Here is the list of MIB necessary for equipments of RVR equipments: