PJ1000C/1300C/2000LCD
ELETTRONICA
7
/ 36
User Manual
Rev. 1.0 - 28/02/11
4.4 Rear Panel Description
4.4.1 Rear Panel Description PJ1000/1300C-LCD
[1] R.F. TEST -60dBc
Output at -60 dB refered to output power level, adapted to
modulation monitoring. Do not use it for spectral analysis.
[2] AIR FLOW
Grid for the intake of the air flow of the forced ventilation.
[3] REMOTE
DB25 connector for telemetry of the machine.
[4] MAINS
Mains supply connectors, 115-230 V 50-60 Hz.
[5] FUSE1
Mains supply fuse.
[6] R.F INPUT
RF input connector, N-type.
[7] R.F OUTPUT
RF output connector, 7/16” EIA flange.
[8] SERVICE
DB9 connector for interconnection with other devices and for factory
parameters programming (only for factory programming).
[9] INTERLOCK OUT
Interlock output BNC connector: to inhibit an external device, as an
exciter. In case of fault, the inner connector is shorted to ground.
[10] INTERLOCK IN
Interlock input BNC connector: to inhibit the amplifier from an
external device, like an exciter.
[11] I
2
C
DB9 connector for I
2
C bus networking.
[12] FUSE2
Mains supply fuse.
