4
/ 36
User Manual
Rev. 1.0 - 28/02/11
PJ1000C/1300C/2000LCD
ELETTRONICA
• User-selectable threshold settings for output power alarm (Power Good
feature)
•
Measurement and display of amplifier operating parameters.
•
Communication with external devices such as programming or telemetry
systems via RS232 serial interface or I
2
C.
Four LEDs on the front panel provide the following status indications:
ON
,
FAULT
,
FOLDBACK
and
RF MUTE
.
The amplifier management firmware is based on a menu system. User has four
navigation buttons available to browse submenus:
ESC
, , , ed
ENTER
.
The rear panel features the mains input connectors, RF power input and output
connectors, remote connector, protection fuse, interlock input and interlock output
connectors and a BNC connector that provides an RF test point with level being
-60dBc lower than power output.
