Radio Modem Box
16 / 29
User Manual
Rev. 1.0 - 24/06/04
ALARM NAME
: Name of alarm sent with SMS (max 20 characters);
THRESHOLD
: Alarm activation threshold in percent;
FRONT
:
0-->1
Alarm is activated if signal exceeds set threshold;
1-->0
Alarm is activated if signal drops below set threshold;
STATUS
:
Enable
Alarm enable
Disable
Alarm disable
When all parameters are set, press this key and the device connected to Radio
Modem Box will store the information.
When finished, click "Exit" to exit the remote station programming window.
Back into "TELECON" standard interface, click the "General" measurement selection
button to set thresholds and operation times for the various alarms according to the
principles outlined in Section "Alarm Management".
Note:
When setting alarm thresholds, allow a margin of some percent points with
respect to normal operation parameters.
