Radio Modem Box
12 / 29
User Manual
Rev. 1.0 - 24/06/04
11) Disconnect the PC connection cable and connect the supplied DB9/DB9 cable.
12) Connect the GSM modem antenna to Radio Modem Box connector "N". Use a
broadband Yagi log-periodic directional antenna (700-900 MHz).
13) Select modem as "GSM" in TLC/SCM settings.
Figure 5.2
5.2 Remote Alarm Reporting Configuration
Firstly, you will have to programme certain Radio Modem Box parameters using the
"TELECON" software. To this end, connect the PC serial port COM to the RS232
connector on Radio Modem Box front panel using a standard Male DB9 - Female
DB9 serial cable.
When using the "TELECON" software for the first time, select the station and then
enter:
COM port used,
Baud rate (9600),
type of connection (direct, via cable).
When you have entered the correct data, click the "Start" button to confirm and the
"TELECON" main screen appears, as shown in the figure:
