R.V.R. Electronica PTX1000DDS, Руководство пользователя

Страница: 12 / 64

6
/ 54 User Manual Rev. 1.0 - 29/11/16
ELETTRONICA
PTX1000DDS
4.4 Rear Panel Description
Figure 4.2
[1] FAN 1 External forced cooling fan.
[2] FAN PLUG 2 Power supply connector for the forced cooling fan.
[3] FAN PLUG 1 Power supply connector for the forced cooling fan.
[4] FAN 2 External forced cooling fan.
[5] SCA1 BNC input connector, SCA1 unbalanced (optional).
[6] LAN RJ45 connector for TCP/IP communication (optional).
[7] SCA2 BNC input connector, SCA2 unbalanced (optional).
[8] OPTICAL IN Not available (reserved for future uses).
[9] MPX UNBAL BNC input connector, MPX unbalanced.
[10] DIGITAL UNBAL OUT Not available (reserved for future uses).
[11] OPTICAL OUT Not available (reserved for future uses).
[12] MONITOR OUT BNC output connector for internal MPX signal monitoring.
[13] RDS COM 2 Not available (reserved for future uses).
[14] 19 kHz PILOT OUT BNC output connector for output tone control, may be used to
synchronise external devices (such as RDS coder).
[15] 1PPS IN BNC connector for TTL signal input of 1PPS (such as GPS receiver).
[16] 10MHz Optional BNC input connector for carrier synchronism signal from
external devices (such as GPS receiver).
[17] INTERLOCK IN BNC connector for interlock. In case of central conductor is connected
to ground,the transmitter is placed into forced standby mode.
[18] EXT AGC RFL Trimmer for automatic gain control based on external signal of reflected
power.
[19] EXT AGC FWD Trimmer for automatic gain control based on external signal of forward
power.
[20] RS232 DB9 connector for direct serial communication.
[21] REMOTE DB15 connector for telemetry of the machine.
[22] GPS EXT DB9 connector for communication with external GPS receiver like
GPSRXNV-01 manufactured by R.V.R. Elettronica S.p.A.
[23] SLOT Slot allocation for the options.
[24] RF TEST BNC output connector for test output at 30 dB below carrier.
[25] RF OUTPUT RF output connector, N-type, 50Ω.
[26] POWER Mains power switch.
[27] FUSE 1 Power supply fuse.
[28] FUSE 2 Power supply fuse.
[29] LEFT (MONO) XLR input connector for left or mono channel.
[30] PLUG Mains power plug.
[31] RIGHT XLR input connector for right channel.
[32] AES/EBU XLR input connector for AES/EBU digital audio input.
[33] POWER SUPPLY Plug-in main power supply.
[34] OPTICAL TOS-LINK
connector for digital audio input in optical fiber
.
[35] RDS COM 1
DB9 connector for RDS data serial communication
.
[36] RDS REMOTE
DB9 connector for electromechanical remote interface.