R.V.R. Electronica PTX1000DDS, Руководство пользователя

Страница: 51 / 64

45
/ 54 User Manual Rev. 1.0 - 29/11/16
ELETTRONICA
PTX1000DDS
6.4 Set up Reset
To reset completely the
PTX1000DDS
to the factory set up, if necessary, follow
the next instructions.
The user must hold pressed the encoder, therefore switch on the PTX1000DDS ,
it will be displayed the following screen:
!!!ATTENTION!!!
If you press YES button all
data in a memory be reset
YES NO
Time remaning: 09 Second
Figure 6.30
In order to make the reset, it is necessary to move the encoder until the “YES”
label is highlighted, therefore press it. By pressing the encoder on the “NO” label
the user is brought back to the normal start up (see chap.7.2).
In any case after 20 seconds, without selection, the user is brought back to the
start up screen.
After you had pressed the “YES” label, when it is highlighted, will be displayed a
new screen with the percentage information of restoring operation.



 ╔════════════════════╗ 
 ║  ║ 
 ║  ║ 
 ║   ║ 
 ╚════════════════════╝ 

Figure 6.31