R.V.R. Electronica PTX1000DDS, Руководство пользователя

Страница: 34 / 64

28
/ 54 User Manual Rev. 1.0 - 29/11/16
ELETTRONICA
PTX1000DDS
6.3.2.10 Alarms list submenu (
AlmLt
)
This menu provides general information on the last twenty alarms stored in a non
volatile memory from the exciter.
In case the buffer is full, the previous alarms stored will have replaced with the
new one, normally it visualized the last alarm saved in memory.
To change the alarm displayed press the encoder, turn until the indicator is
highlighted on the “Alarm” label and then press again to confirm. Select one of the
twenty alarms choose itself from the list of alarms 1 ... 20 using the encoder.
If the user confirm or doesn’t confirm the new value (i.e., the button is not pressed),
the cursor stops blinking and remains on the first alarm stored.
To erase all the stored events use again the encoder, move cursor to “RESET”
and confirm reset operation.
To exit from this submenu rotate the encoder until the “EXIT” label is is highlighted,
then press the encoder to confirm and return to Maintenance submenu
navigation.
| |
Alarm : 1 RESET
| |
| | | |
| |
Date :00/00/00
| |
| |
Time : 00:00
| |
| |
Name :
| |
| |
Forward Power
| |
| | | |
| | Maint ---
[Exit]
---| |
Figure 6.14
Alarm
Visualization and selection of the stored alarm number.
Reset
Selection for the alarms reset, this operation erases all stored
events.
Date
Visualization of the alarm record date expressed as dd/MM/yy.
Time
Visualization of the alarm record time expressed as HH:mm.
Name
Visualization of the of stored alarm name.