R.V.R. Electronica PTX1000DDS, Руководство пользователя

Страница: 10 / 64

4
/ 54 User Manual Rev. 1.0 - 29/11/16
ELETTRONICA
PTX1000DDS
The PTX1000DDS design is based on a modular concept: the different functions
are performed by modules that are connected directly through male and female
connectors or through flat cables terminated by connectors. This design facilitates
maintenance and module replacement.
A LCD on the front panel and a control knob provide for user interfacing with the
microprocessor control system, which implements the following primary feature:
• Set up of the power output
• Set up of the working frequency
• Enabling or disabling of the power output delivery
• Measurement and visualization of the working parameters
On the rear panel is placed the audio section, which allows the interfacement
with other devices. From this section are available the analogic connectors for
audio input (mono, audio stereo, MPX), digital audio input (AES/EBU electrical
and optical), 19kHz pilot tone output and two SCA input for signals modulated on
subcarriers from external coders.
The audio section includes functionality of RDS coder, externally programmable
through the proper RVR software.
There are also placed the mains power plug, RF output, RF test, the remote
connector and the protection fuse.
The equipment foresees several options on request, as GPS board function.