R.V.R. Electronica PTX1000DDS, Руководство пользователя

Страница: 37 / 64

31
/ 54 User Manual Rev. 1.0 - 29/11/16
ELETTRONICA
PTX1000DDS
6.3.3 Administration menu
(
Admin
)
Under this menu are available advanced information regarding the status of the
equipment and most of these can be modified.
Turning the encoder, you can move the cursor to the next submenu label, while
its informations and measures appears in the centre of the window.
To return to the default menu, rotate the encoder until the “EXIT”
label is highlighted, then press to exit the Maintenance submenu.
In alternative you can avoid to use the encoder for about 2 minutes to return to
the default menu automatically.
To access to the several submenus present press the encoder, turn until the
indicator is highlighted on the desired editable parameters and then press again
to confirm. To exit from this submenu rotate the encoder until the “EXIT” label
is is highlighted, then press the encoder to confirm and return to Administration
submenu navigation.
To change the editable parameters press the encoder, turn until the indicator is
highlighted on the desired parameter label and then press again to confirm. The
setting of the value is now possible by the rotating of the encoder.
After having modified the value of a parameter, the cursor goes on blinking for
approximately 10 seconds, waiting for confirmation from the user. If the user doesn’t
confirm the new value (i.e., the button is not pressed), the cursor stops blinking
and remains on the selected parameter.