R.G.V. FreshQuality SV 400, Инструкция по эксплуатации

Страница: 36 / 52

36
EN
V
A
CUUM SEALER
VACUUM PACKAGE IN A CANISTER & VACUUM BOWL
Use suitable containers for vacuum packaging (not provided, commer-
cially available).
If using universal caps don’t use plastic or glass containers that
are not suitable since they could implode under the vacuum
pressure of the appliance and cause injury.
1. Wipe canister cover, canister base and ensure they are clean and dry.
2. Take the rubber hose from the side compartment
of the unit (fig. 10a).
3. Put the items into the canister and do not fill up too
full so that the cover can be in good contact with
the canister bowl rim (leave about 3 cm of space).
Clean the cover rim of the canister and bottom seal
gasket of the canister cover.
4. Insert one end of the hose into the air intake and
another end of the hose into the center hole of the
canister cover (fig. 11).
5. Check the led status of “Sottovuoto” (Vacuum)
buttons and make sure if it is in Normale
(Normal) setting;
6. Press the Contenitore (Canister) button to start
vacuuming (fig. 12). To ensure there is no air leaking
between the cover and the canister, use your hand
to push down the cover at the beginning of the vac-
uuming work. The machine will stop automatically
when enough vacuum pressure is achieved.
7. Take out the hose tube from the canister or square canister immediately when vacuuming
is complete.
8. Record the date of vacuum.
not supplied