R.G.V. FreshQuality SV 400, Инструкция по эксплуатации

Страница: 31 / 52

31
EN
V
A
CUUM SEALER
1.
Sottovuoto&Saldatura/Annulla (Vacuum Seal/Cancel) button
This button has two functions depending on the machine status:
- At stand-by condition, it starts the automatic operation of vacuuming the bag and
then automatically seals the bag when vacuum is complete;
- At working (vacuuming or sealing operations) condition, it stops the machine.
2.
Sottovuoto a Impulsi (Pulse Vacuum) button
- Push pulse vacuum to manually control the pump/vacuum.
- Press this button, and the device starts vacuuming; undo, it will stop.
- This process can be repeated.
- Then press Saldatura manuale (Manual seal) button when meet desired pres-
sure, turn to seal.
Different pressure according to different type of foods can be chosen.
3. Saldatura manuale (Manual seal) button
This button provides two functions:
a. To seal the open end of a bag without vacuuming air suction;
b. Used to make a bag from a bag roll;
- When the automatic “Vacuum & seal” function is in operation, this button stops
the motor pump and immediately starts to seal the bag so that less vacuum pres-
sure inside the bag can be controlled by the operator to avoid crushing for delicate
items.
Please let the machine cool down with 15/20 seconds after finished one sealing
cycle (pause time between two cycles (recommended) = minimum 1 minute).
4. Sottovuoto (Type of Vacuum):
For choice of different vacuum pressure:
-
Normale (Normal) function button.
For regular items storage in normal vacuum pressure;
-
Delicato (Gentle) function button.
For some soft & crushable items storage where less vacuum pressure is desired.
>> Default setting is Normale (Normal).
5.
Sealing time:
Used for choosing the best bag seal time:
- Button of Secco (Dry) setting: for dry bags and items without moisture, with
a shorter heat sealing time;
- Button of Umido (Moist) setting: for wet bags or foods with moisture, with an
extended heat sealing time.
- Button of Esteso (Extended) used for larger vacuum bags, to extend the
pump/vacuum length longer.
>> Default setting is
Secco (Dry) sealing time.