R-Co Kingsman Marquis MQVL48BLPE2, Руководство по установке

Страница: 43 / 80

MQVL48RLFB / MQVL48RLFE Fluted Liner Installation Option
NOTE: If using VLBCK48 CORNER KIT , remove
Inner Liner
Panel
from Corner Kit if installed.
STEP ONE:
Remove Liner Clips from inside of firebox with a 1/4” hex driver.
INSTALLING MQVL48RLFB:
STEP TWO:
Install
BACK LINERS
. Replace
Back
Clip
with [Qty 2] DT Screws.
INSTALLING MQVL48RLFE:
STEP THREE:
Install Side Liners. Replace
End
Clips
with [Qty 2] DT Screws.
NOTE: if you are using VLBCK48
CORNER KIT
,
only one End Panel
will be used.
⚠
Note: Discoloration of Liners
Is Not Covered Under Warranty.
Liners may discolor during
normal operation of your
appliance. This is normal, and not
considered a defect.
RIGHT
SIDE
END
PANEL
BACK LINER
LEFT
SIDE
END
PANEL
RIGHT SIDE
END PANEL
MQVLB48 WITH VLBCK48 CORNER KIT SHOWN
END CLIP
BACK CLIP
END CLIP
-MQVL48RLFE- END LINER KIT
-MQVL48RLFB- BACK LINER KIT
BACK LINER
BEND END CLIP
INTO SHAPE
REINSTALL INTO
SAME HOLE IN
FIREBOX
43