R-Co Kingsman Marquis MQVL48BLPE2, Руководство по установке

Страница: 29 / 80

VLBCK48 Corner Kit for MQVLB48 Peninsula Bay Option
MUST BE INSTALLED BEFORE UNIT IS INSTALLED INTO FRAMING.
CORNER KIT CAN BE INSTALLED AT EITHER END OF FIREPLACE.
⚠
Warning: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
Contents of Kit:
 Firebox Cover with Gasket - 1
 Heat Shield with Standoff- 2

Inner Liner Panel - 3
 Front Side Cover -
4

90ml Tube Millpac

[Qty 22] 1/2” DT Screws
 [Qty 6] Pan Head Screws
Procedure:
1.
Remove Lower Front
Panel Assembly.
Remove Side Glass
Panel from firebox
(Refer to
Glass Door
Installation and
Removal
). This side
glass will not be
reused.
2.
Remove
Outer
Glass Supports
from side of fireplace.
These will not be
reused.
3.
Apply a small bead of
Millpac to Firebox
Cover Gasket. Insert
Firebox Cover into
place from front of
fireplace.
4.
Using the 2
Location Starter
Holes in Front Post
of fireplace to
position Firebox
Cover , Fasten to
firebox using 1/2”
DT
Hex Screws.
5.
IF USING
PORCELAIN OR
FLUTED LINERS:
For Back Corner,
[Qty 4] 1/8” pilot
holes can be drilled,
or screws
must be
removed and
Remove Lower
Front Panel
Assembly
SHEET METAL COMPONENTS:
1
2
3
4
Remove Side
Glass from
firebox.
Remove Outer
Glass Supports
CONTINUED ON NEXT PAGE
Apply Millpac
to gasket
Stand-off
Heat Shield
Lower Front
Panel Assembly
must be removed
Firebox
Cover
1
2
DO NOT
STRIP
SCREWS.
Firebox Cover
Heat Shield Inner Liner Panel
Fr
on
t S
ide Co
ver
29