R-Co Kingsman Marquis MQVL48BLPE2, Руководство по установке

Страница: 40 / 80

STEP FIVE : Insert Corner Fillers if NOT using MQVL48RGE End Panels:
IF YOU ARE NOT INSTALLING MQVL48RGE End Panels, Insert Corner Fillers behind sides of Glass Back Panel as
shown and push Glass Back Panel into place.
IF YOU ARE INSTALLING MQVL48RGE End Panels, simply push Glass Back Panel into place against firebox.
STEP SIX : Tighten Screws beneath flue, replace [Qty 2] DT screws firebox through top end tabs, and Fasten bottom tabs
with [Qty 2] DT Screws. Replace screws in False Bottom and replace Pilot Shield.
You are now ready to install MQVL48RGE if desired.
Refer to instructions included in MQVL48RGE kit.
⚠
Note: Discoloration of Glass Liners Is Not Covered Under Warranty.
Glass Liners may discolour during normal operation of your appliance.
This is normal, and not considered a defect.
NOTE: If using
VLBCK48 CORNER
KIT and you are NOT
installing a Glass End
Panel, Only One
Corner Filler will be
used, as the Inner
Liner Panel from
Corner Kit is at the
other end.
Corner Filler
Corner Filler
Bottom Tab
Clearance notch for False Bottom Flange.
40