- 5 -
PACKING LIST
The device and its accessories come in a
tool case.
The package contains:
1.Main body X 1
(Only V5555 comes with probe tip accessories:
hook X1, magnetic pickup X1 & 45° mirror X1.)
2.User Manual X 1
3.Toolbox X 1
BASIC OPERATION
INSTALL BATTERIES
The battery compartment is accessible from the back of the unit.
Press the battery cover buckle and remove the cover and set it aside.
Load four “AA ” batteries into the compartment according to the polarity markings.
Replace the battery compartment cover and secure it.
PREPARE THE PROBE
To take out the probe, turn the unit over to its back faces you, use your thumb and index
finger at the positions marked .
0Note that the probe is tightly wrapped within a twisting channel that makes four full turns
around the inside of the tube slot. The probe can be unc oiled to six wo rking lengths
through two probe exit ports.Unwrapping only one full turn will make the probe about
27cm long ( counting from the tube exit port to the camera head); Unwrapping two turns
will make the probe about 62cm long ; Unwrapping three turns
will make the probe about 95cm long .
Each length incurs a tradeoff of probe reach ver sus probe
rigidity. A longer probe is obviously better for inspecting distant
objects. But when uncoiled to its maximum length of 100cm, the probe sags from its own
45cm
