- 1 -
GENERAL SAFETY INFORMATION
WARNING! Read and understand all the instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury.
SAFETY INSTRUCTIONS
☞
Prevent object and liquid entry. Never spill liquid of any kind on the video display unit.
Liquid increases the risk of electrical shock and damage to the product.
☞
The unit is not shock-resistant. Do not use this camera as a hammer and avoid high
impact resultant from things such as dropping the unit from height.
☞
Do not immerse video handle in water. Avoid moisture, and store the product in a dry
place. Such measures reduce the risk of electric shock and damage. The lens and tube
are water resistant when the unit is fully assembled, but the video display unit is not.
☞
Do not use the camera if condensation forms inside the lens. Let the water evaporate
before using again.
☞
Do not use the unit to inspect environments known or suspected to contain exposed
electrical wiring.
☞
Do not use the unit in the presence of flammable or explosive gases.
☞
The unit is designed for industrial inspections. Never use to perform medical
inspections.
☞
Turn off the system if it is not in use.
☞
Remove the batteries when cleaning the unit.
☞
When necessary, please plug all FOUR (4) batteries in this unit with new ones.
☞
Use only the size and type of battery specified.
☞
Be sure to install the battery with the correct polarity as indicated in the battery
compartment.
☞
Properly dispose of batteries. Exposure to high temperatures can cause batteries to
explode, so do not dispose in a fire.
☞
Some countries have regulations concerning batteries disposal. Please follow all
applicable regulations.
