Qwizdom Actionpoint, Руководство пользователя

Страница: 5 / 38

Getting Started 4
Qwizdom Actionpoint 2007
2.3 Hardware Setup
1. Plug the USB cable into the RF Host and then plug the other end of the USB cable
into an open USB port.
2. Place two AA batteries (provided in the remote set) and insert the screw (optional)
into the back of the Q4 RF remote to secure the battery compartment. Plug the Q5
RF participant and Q5 RF instructor remotes into the multi-charger and/or single
charger for 24 hours before first use.
Installing USB Drivers on Vista
You will need to do this procedure twice ( because there are two drivers ).
1. Insert the Qwizdom Actionpoint disc into the computer and make sure the host is
plugged in properly.
2. From the Start menu, go to the Control Panel .
3. Click on Hardware and Sound .
4. Click on Device Manager .
5. Select the option View Devices by Type under the View menu.
6 . Qwizdom RF Host should be located under Universal Serial Bus Controllers , Ports and
Unknown or Other Devices .
7. When you find it, double-click on it and click on the Driver tab.
8. Click on the button that says Update Driver . The installation wizard will appear.
9. Select " Browse Computer for Software Driver " and click Next .
10. Click on the Browse button. A window appears.
11. Click on My Computer , click on the drive that Qwizdom Actionpoint is in, and then
find the folder that says USB_Drivers .
12. Click OK and then Next.
13. When it's done installing, click on Close. Repeat the above steps once more and
then restart your computer.
Installing USB Drivers on Windows 2000/XP
You will need to do this procedure twice ( because there are two drivers ).
1. Insert the Qwizdom Actionpoint disc into the computer and make sure the host is
plugged in properly.
2. From the Start menu, go to the Control Panel or go to Settings and then Control
Panel .
3. Double-click on the System icon and click on the Hardware tab.
4. Click on the Device Manager button.
5. Select the option View Devices by Type under the View menu.
6. Qwizdom RF Host or Qwizdom USB Base should be located under Universal Serial Bus
Controllers , Ports and Unknown or Other Devices .
7. When you find it, double-click on it and click on the Driver tab.
8. Click on the button that says Update Driver . The installation wizard will appear.
9. Select " Install from a list or specific location " and click Next .
10. Select " Search for the best driver in these locations " and check the " Search removable