x
1R
Easy
Non contractual document. Subject to change. Cod. 600000PE02698 - 20200207
x1R Easy Keypad Reader Installation Guide (EN) - © 2020 Iseo Serrature S.p.a. - www.iseo.com
Keypad Reader
WARNINGS
Read this manual prior to use the device in order to ensure a safe and proper use.
Preserve this manual as future reference.
The installation and maintanance of the device must be carried out by qualified technical staff, adequately
trained by ISEO.
The instructions should be carefully followed during installation. These instructions and any maintenance
instructions should be passed on by the installer to the user.
No modifications of any kind are permitted, except for those described in these instructions.
The product must be destined only for the use for which it is expressly designed and therefore as a keypad
reader for civil and industrial locations. Any other use is considered improper and dangerous.
The electrical connection must be made according to the constructor's instructions and respecting the
regulations in force.
Disconnect the power supply before carrying out any technical service that involves opening or accessing
the internal parts of the product. For all repairs, exclusively contact a technical assistance center authorized
by the constructor.
3. INSTALLATION EXAMPLE
https://www.iseo.com/it/en/download
ELECTRONIC SUPPORT SERVICE
iseozero1
.com
®
i s e o
. c o m
Iseo Serrature s.p.a
Via San Girolamo 13
25055 Pisogne (BS)
ITALY
Tel. +39 0364 8821
[email protected]
numero verde gratuito
800-728722
Download
User Manual
iseo.com
Max 330mm
3.1 INSTALLATION EXAMPLE
2
65 mm
R2 MAX
85 mm
1
Be careful to respect the reader exact hole measures,
in order to leave enough space on the sides to properly
fix the keypad screws.
RFID antenna 125Khz.
Operating and storage temperature: -20°C/+70°C with Relative Humidity Max. 95% without condensing.
IP44 (related to product installed in the door).
1. COMPONENTS
2. DIMENSIONS
Keypad
Reader
Cover
Fixing
screws
Cover can be provided in different finishes
and needs to be separately ordered. For the
product codes refer to the catalogue
available at
iseo.com
.
Connection cable not included in the kit.
It is supplied in the x1R Easy packaging.
UM = mm
5
25
68
113
4. ELECTRICAL CONNECTION
Connect the Keypad Reader using the
same cable of the standard external
reader. Cable supplied in the x1R
Easy packaging.
3.2 INSTALLATION EXAMPLE
1
2
3
3
4
External module:
Keypad Reader
Internal module:
Programming board
