Qwizdom Actionpoint, Руководство пользователя

Страница: 32 / 38

Qwizdom Actionpoint User Guide 31
Qwizdom Actionpoint 2007
4. Double-click on the System icon and click on the Hardware tab.
5. Click on the Device Manager button.
6. Select the option View Devices by Type under the View menu.
7. Scroll to Universal Serial Bus Controllers and Ports . Look for Qwizdom RF Host.
The Qwizdom RF Host might also be located under Unknown or Other Devices .
8. When you find it, double-click on it (if there is an exclamation point or
question mark on it) and click on the Driver tab.
9. Click on the button that says Update Driver . The installation wizard will
appear.
10. Select ' Install from a list or specific location ' and click Next .
11. Select ' Search for the best driver in these locations ' and check the ' Search
removable media ' and ' Include this location in search ' boxes.
12. Click on the Browse button, click on My Computer , click on the drive that
Qwizdom Actionpoint is in or area where you saved the USB Drivers folder
(that was downloaded from the Qwizdom website), and then find the folder
that says USB_Drivers .
13. Click OK and then Next. A prompt might appear that saying the drivers has
not passed the Microsoft Windows Update testing. Click on Continue Anyway
and then Finish .
14. Repeat the above steps once more (if needed) and then restart your
computer.
6) My remotes won't respond while in presentation and/or in the Assign Fixed
Numbers screen...what do I do?
There are a few reasons why your remotes may not be responding:
Double check that the host is plugged in and installed properly (see Initializing the
Host for more information). The host must be initialized for the remotes to
respond during presentation and/or assigning fixed numbers.
Q4 RF remotes require two AA batteries. Be sure the batteries are placed properly.
Q5 RF remotes have rechargeable batteries. The remotes must be charged for 24
hours.
Be sure all remotes have the correct session ID entered into the remote (see RF
Hardware Setup for more information).
If remotes aren't responding during presentation, make sure you have the correct
participant list loaded and that you used the
Presentation button to start your
presentation.
7) When I present a PowerPoint activity, my remotes aren't responding and the
Qwizdom menu options aren't appearing (such as timer, response chart, etc.).
There are a couple reasons why the menu options might not be appearing and the
remotes aren't responding during presentation:
If you select
Slide Show or View Show , that will launch the PowerPoint presentation
using Microsoft PowerPoint rather than Qwizdom . Remotes can't be used if you
launch the presentation using PowerPoint . To present the PowerPoint activity