RECORD – Control menu page
This menu page is used to control record operations. The state of this menu page changes depending
upon the current step of record process.
Record settings are summarized in the left window below the dashboard. The white bar below the
settings summary displays the destination path where recorded content will be stored. If you wish to
change a setting, you must go to the appropriate record menu page for that function and make the
change there. For example, to change the destination directory where new clips are stored you must
modify the
Destination
setting on the
RECORD – Input
menu page prior to recording.
RECORD – Control menu page (Record mode setup)
If the system is not currently in record mode (as indicated in the dashboard label [RECORD]), you must
first press the “
•
Setup” button. If the system is setup in record mode with the current input settings, the
Setup option will not be displayed.
RECORD – Control menu page (System ready to Record)
Once the system is setup to record, press the “
•
Record” button to begin recording.
RECORD – Control menu page (Recording a clip)
During a record operation, the right window labeled “Recording” displays statistics of the record
operation. Record statistics includes the clip length in absolute timecode, file size of the clip, the peak
composite data rate and any errors such as dropped frames.
To end the record operation, press the “ STOP”
button.
QuVIS Encore
Page 95
QSR Version 3.1