Introduction to the Graphical User Interface (GUI)
Local control of the QuVIS Encore is performed from the front panel using the Graphical User Interface
or GUI. The GUI menu system is a collection of menu pages that provides a single interface to perform
the basic operations needed to play content, manage files, monitor status and change the configuration
of the unit.
The GUI is automatically started once the unit has completed its power on cycle. Once the GUI is
loaded on the front panel display, all system services are available including local and remote control.
This section provides a description of the GUI menu system.
•
•
•
•
Overview
The front panel menu system features fast access to any of its dozen-plus screens or menu pages.
Menu pages are collated into logical groups in order to place pages with similar control in close
proximity of each other.
SETUP
PG 5/5
SETUP
PG 4/5
PLAY
PG 5/5
The primary setup and configuration menu pages (Record, Output, Remote and Setup) are labeled
making it easy to quickly identify what menu group and page is currently active. Fast navigation
between menu pages is achieved using the
soft
buttons (below the display) to advance to the next page
within the group in either direction. Group navigation is achieved using the popup window activated by
pressing the
MENU
button.
The PLAY group of menu pages is the exception as these are the menu pages that will most often be
accessed and therefore are governed by a different rule set.
IMPORTANT!
The exact number of menu groups and pages may change. The example given above is
only an illustration of the menu navigation and layout concept. The actual number of screens will vary.
PLAY
PG 4/5
PLAY
PG 3/3
PLAY
PG 2/3
PLAY
PG 1/3
PLAY
PG 3/5
PLAY
PG 2/5
OUTPUT
PG 1/5
DASHBOARD
PLAY
PG 2/2
REMOTE
PG 1/2
DASHBOARD
SETUP
PG 3/5
SETUP
PG 2/5
SETUP
PG 1/5
DASHBOARD
DASHBOARD
QuVIS Encore
Page 64
QSR Version 3.1
