SETUP – GPI Out menu page
This menu page allows the operator to program the server to output a GPI signal on the specified
channel when a conditional event is encountered. Depending upon the configuration of the QuVIS
Cinema Player, up to 10 output GPI channels may be available.
WARNING!
If GPI events are used with play scripts (QScripts)
then you must ensure that the GPI settings defined
on this menu page do not use the same GPI channel resources as defined within the script file.
GPI Out Page Menu Item Description
GPI 1
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 2
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 3
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 4
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI 5-10
Use this control to instruct the system to output a GPI signal on this channel
when the specified condition is met.
GPI Output Options
This GPI mechanism enables you to generate a GPI output signal on a specific GPI channel when the
specified system event is detected. The GPI signal will remain on while the event (such as the unit
playing a clip) is active.
None – No action is defined for this GPI output channel.
Fault – When the system detects a “fault” condition, a GPI output signal will be generated on the
specified output channel. This allows the server to signal an external controller or monitoring
equipment that a system fault has occurred.
Playing – Once playback of a media file or clip has begun, the system will output a GPI signal
on the specified channel. This allows the server to report its playback status with external
control equipment.
QuVIS Encore
Page 119
QSR Version 3.1