Chapter 3: Installation
3-10
Connect to PC Console
You will need to connect the
Tenor BX
to your workstation’s serial port via RS-232 connection.
(This connection will be used when you assign an IP address to the unit.) For the instructions below,
it is assumed you are connecting to a Windows PC.
Figure 3-7
Connect to PC Com Port
1. Insert the male end of the DB-9 cable into the port labeled
Console
. (See
Chapter 2: Hardware
Components
for RS-232 connector pinouts.)
2. Insert the female end of the DB-9 cable into your workstation’s serial port (see your PC docu-
mentation for more information about this port).
DB-9
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
