manualshive.com logo in svg

Quingo Flyte, Руководство владельца и по обслуживанию

Поделиться
Скачать
Quingo Flyte Скачать руководство пользователя страница 20

 

 

20 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Front & Centre Baskets                                                              

 

 

The Front Basket 

 

To remove the basket pull the pin out and simply pull the basket forward. 

To refit the basket, line up the 2 tubes and push the basket as far forward as possible.  

Push the pin in fully. 

 

Maximum Weight 

The maximum load weight of the front basket is 8kg 

 

The Centre Basket 

 

The centre basket is placed underneath the seat. The basket has two magnetic discs at 

each corner which locate onto the frame under the seat. 

 

To fit the basket simply line up the magnets, the basket should be attached by magnets 

    

          

 

 

 

  

 

    

      

 

 

 

Maximum Weight 

The maximum load weight of the centre basket is 10kg 

 

 

  

Caution: 

Please make sure both front and centre baskets are 

removed before folding the Flyte for transporting. 

Содержание Flyte















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды