Quingo Flyte Скачать руководство пользователя

Страница: 11 / 78

Emergency Brake

A Brief Explanation of How The Brakes Work On Your Scooter.

Your scooter has 3 braking systems:-

1. The First is the emergency brake. This is situated on the tiller (see image below).

This is a hand operated brake to be used in an emergency only.

2. The Second is the electromagnetic brake or Automatic handbrake. When you move

off, this releases automatically. When the scooter stops it also engages

automatically and stops the scooter rolling forward or backward.

3. The Third is the regenerative brake. This works when you release the accelerator

lever. The faster you release the lever the faster the machine slows down. When it

slows down enough the automatic brake engages.

If you are riding the scooter and you feel there is a fault and the scooter is not braking

correctly pull in the lever (Arrowed) to slow the vehicle. Immediately switch off the ignition

and phone the Service Provider.

Note:

If you should become confused with the braking, just release the lever mechanism and the

vehicle will come to a stop.

DO NOT USE THE EMERGENCY BRAKE UNDER NORMAL DRIVING

CONDITIONS.

DO NOT DRIVE THE VEHICLE WITH YOUR HAND RESTING ON THE

EMERGENCY BRAKE.

This is an

Emergency Brake Only.

Throttle Lever Mechanism.

Содержание Flyte















































































Результаты поиска

Содержание Flyte

Отзывы:

Похожие инструкции для Flyte

Бренды по названию

Популярные бренды

Quingo Flyte, Руководство владельца и по обслуживанию

Результаты поиска

Содержание Flyte

Отзывы:

Похожие инструкции для Flyte

Бренды по названию

Популярные бренды