Quingo Flyte страница 12 Скачать руководство пользователя

Страница: 12 / 78

Free Wheel Device

Important Safety Notice:

The freewheel device allows the vehicle to be moved without

power. When the lever is moved forwards the automatic brakes are released. This means

there is no braking except for the emergency brake. Follow these instructions and if you

are in any doubt contact the service provider immediately.

IF YOU ARE UNSTEADY ON YOUR FEET DO NOT ATTEMPT THIS MANOEUVRE

1. Make sure the scooter is on level ground

2. Remove the ignition key

3. Do not sit on the scooter at any time the vehicle is in freewheel

4. Release the lever (see photograph 1- the arrow indicates direction to release)

5. Push the scooter to the area you require using the emergency brake (Page 11) to

control the speed

6. Lock the lever (see photographs 2- the arrow shows direction to lock.)

The freewheel release lever is situated to

the rear right hand side of the lockable

box. This picture shows the vehicle in the

locked position.

To release, pull out and forward. This

may be quite stiff to operate. The picture

shows the vehicle in freewheel mode.

Lock

Unlock

Points when using the freewheel device.

1.  NEVER RELEASE THE BRAKE AND SIT ON THE SCOOTER
2.  NEVER RELEASE THE BRAKE ON A SLOPE. ONLY ON FLAT GROUND
3.  ALWAYS REMOVE THE IGNITION KEY
4.  NEVER RELEASE THE FREEWHEEL LEVER WHEN THE FLYTE IS ON THE

DOCKING STATION.

When you have finished moving the scooter push the freewheel lever

back into the locked drive position immediately.

Содержание Flyte















































































Результаты поиска

Содержание Flyte

Отзывы:

Похожие инструкции для Flyte

Бренды по названию

Популярные бренды

Quingo Flyte, Руководство владельца и по обслуживанию

Результаты поиска

Содержание Flyte

Отзывы:

Похожие инструкции для Flyte

Бренды по названию

Популярные бренды