Section VI - Maintenance
• Preventive maintenance schedule
• Oil specifications
• Drive motor
• Air filter
• Oil and oil filter change
• Service kits
• Storage after installation
• Disposal of used material
Preventive maintenance schedule
Control panel
CAUTION!
Before carrying out any maintenance, repair work or adjustments, proceed as follows:
• Stop the vacuum pump.
• Close the air inlet valve.
• Press the emergency stop button (15).
• Switch off the voltage.
• Vent the vacuum pump by opening the plug located on the cover of the air inlet filter.
For detailed instructions, see section Problem solving.
The operator must apply all relevant Safety precautions.
Warranty - Product Liability
Use only authorised parts. Any damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or Product Liability.
Service kits
For overhauling or carrying out preventive maintenance, service kits are available (see
section Service kits).
Service contracts
Quincy offers several types of service contracts, relieving you of all preventive
maintenance work. Consult your Quincy Customer Center.
General
When servicing, replace all removed O-rings and washers.
Intervals
The local Quincy Customer Center may overrule the maintenance schedule, especially
the service intervals, depending on the environmental and working conditions of the
vacuum pump.
The longer interval checks must also include the shorter interval checks.
Service plans for vacuum pump with an Airlogic Graphic controller.
Besides the daily and 3-monthly checks, preventive service operations are specified
in the schedule below. Each plan has a programmed time interval at which all service
actions belonging to that plan are to be carried out. When reaching the interval, a
Quincy Vacuum Pump-QSV Series
75
