Section I - General Information
WARNING!
If the machine is equipped with an automatic restart after voltage failure function is
active, be aware that the machines will restart automatically when the power is restored
if it was running when the power was interrupted!
CAUTION!
In a domestic environment, this product may cause radio interference in which case
supplementary mitigation measures are required.
6. Avoid contact with pump intake during operation.
7. The owner is responsible for maintaining the unit in safe operating condition. Parts
and accessories shall be replaced if unsuitable for safe operation.
8. It is not allowed to walk or stand on the unit or on its components.
Safety precautions during installation
CAUTION!
All responsibility for any damage or injury, resulting from neglecting these precaution,
or non observance of the normal caution and care required for installation, operation,
maintenance and repair, even if not expressly stated, will be disclaimed by the
manufacturer.
Precautions during installation
1. The machine must be lifted using suitable equipment in accordance with the
applicable safety regulations. Loose or pivoting parts must be securely fastened
before lifting. It is strictly forbidden to dwell or stay in the risk zone under a lifted
load. Lifting acceleration and deceleration must be kept within safe limits. Wear a
safety helmet when working in the area of overhead or lifting equipment.
2. The unit is designed for indoor use. If the unit is installed outdoors, special
precautions must be taken; consult Quincy.
3. Place the machine where the ambient air is as cool and clean as possible.
Never obstruct the cooling air inlet. Water handling capacity is detailed in the
specification.
4. Any blanking flanges, plugs, caps and desiccant bags must be removed before
connecting the pipes.
5. Vacuum connection and discharge pipes must be of correct size and suitable for
the working pressure and temperature. Never use frayed, damaged or worn hoses.
Distribution pipes and connections must be of the correct size and suitable for the
working pressure.
6. The aspirated air must be free of flammable fumes, vapors and particles, e.g. paint
solvents, that can lead to internal fire or explosion. Follow the material safety.
2
Quincy Vacuum Pump-QSV Series
